| 1- The Mixer basically consists of a casing and a centrifugal pumps impeller which are mounted vertically.The suction side has a double-wall tube that keeps the inlet of solids separate from that of liquids,thus avoiding the formation before the material enters the casing. |
2- The liquid enters the mixing chamber at a high velocity,thereby creating a vacuum on the center of the impeller,which causes the suctions of the solids,The fall of the solids can be regulated by means of a valve situated at the bottom of the hopper.
It is important to keep low pressure at the suction and at the discharge sides on the blender.Avoid cavitation,thus a feeding pump must be provided only for the applications that really require it(considerable pressure drops at the suction side,high viscosity products,ect.)Please,keep in mind that the suction capacity will decrease. |
| 3- When the discharge pressure is high,centrifugal pump needs to be fitted to the discharge side of the blender. |
| 4- For viscosities above 500 CP,the feeding pump and discharge pump must be positive displacement pumps. |
