The Details of product
Standard | SMS,DIN,3A |
Material Contact Parts | SS304/SS316L(1.4301/1.4404) | Provided with material inspection report |
Material Non-contact Parts | SS304(1.4301) |
Size | 1/2”-4”, DN10-DN100 |
Body Combination | 20 Model,30 Model,11 Model,12Model,21A Model,22A Model,21 Model,22 Model,31Model,32 Model 111 Model,112 Model,121 Model,122Model,211 Model,212 Model,221 Model,222 Model |
Connection | Butt-weld,Tri-clamp,Male Thread,Female-Male Threaded,Union,Weld-Thread,Flange |
Seal Material | Silicone,EPDM,FKM,Buna. All seals material comply with FDA21CFR117.2600 |
Power Option | Manual Operated |
| SS Pneumatic Actuator |
| Position Sensor, C-top Controller, C-top Controller (AS-I) |
Working Pressure | ≤10bar(145psi) |
Supply Pressure for Air Actuator | 5~8(72.52psi~116psi) |
External Surface Treatment | Ra32~64uin(0.8~1.6um) |
Internal Surface Treatment | Ra16~32uin(0.4~0.8um) |
Sanitary Flow Diverter Division Valves can be actuated either manually or pneumatically. The series of Sanitary Pneumatic Flow Division Valves makes major medium reaching the purpose of revising or end stop, because the good sealability and cleanability, they are extensively use different sanitary industry areas.They can be fitted with control tops and proximity. It is widely applied to many filed,such as beer,beverage,dairy food,fruit juice,pharmacy,biological etc.
Sanitary Pneumatic Diverter Valves have two types valves, including of cut-off type and reversing types. The cut-off type can be made of two or three pipeline connector. The reversing type can be made of three to five pipeline connector. Their variety fully satisfied the demands of market.
Technical Specifications
Max. pressure: 10bar
Min. pressure: 0.2bar
Temperature range：
EPDM: -5 ~ 212°F(-20 ~ 100℃)
Silicone: -31 ~ 248°F(-35~ 120℃)
FKM:10~ 392°F(-12.2 ~ 200℃)
Other materials are Available upon request
Options
1.The gasket can be Silicone,EPDM,FKM,Buna. All seals material comply with FDA21CFR117.2600
2.Connection can be Butt-weld,Tri-clamp,Male Thread,Female-Male Threaded,Union,Weld-Thread,Flange
or others upon request.
4. Power operated: Manual,SS Pneumatic Actuator,Position Sensor, C-top Controller,
C-top Controller (AS-I)
5. Pneumatic head: Normally Closed(NC)-Air to Open,Spring to Close, Normally Open(NO)-Air to Close,Spring to Open
Design Features
1.Various standards can be provided: SMS,DIN,3A
2.Available in sizes from 1/2”-4”, DN10-DN100
3.Seals comply with FDA 21CFR 177. 2600.
4.The valve body can be customized with a wide selection of different connections.
Advantages
1.Sanitary diverter valves have more safety,cleanliness, durability, and aesthetics.
2.With open bracket, the actuator body was dissociated, you can check the shaft seal directly. The design maks the transmission and product are partially seperated to prevent heat transfer from the body ro the actuator.
3.The condition " NO" and " NC" can be change instantly.
4.The spherical body has the ideal flowability and cleaning properities. Meanwhile, the treatment of material is more moderate.
5.The standard valve design makes the coupling combination has a high degree of spirit activity and diversity.
6.Metal stop ensures longer seal life.
7.Fast and convenient assembly and maintenance operations.
Quality requirement for compressed air used in actuator
Compressed air connection: Furnish air pipe with air connector R1/8"
Maximum particle size: 0.01mm
Maximum oil content: 0.08ppm
Dew point: 10℃ or lower below atmospheric temparture
Maximum water content: 7.5g/kg
How to order ?
1.What's material, such as SS304 or SS316L ?
2.What's available size, such as 1inch to 4inch, DN25 to DN100 ?
3.What's connection end, such as butt-weld, tri-clamp, male threaded or female threaded ?
4.What's body cobmination, such as 20model, 21model, 30model, 22model ?
5.What's power, such as manual, pneumatic actuator or control head 24v ?
