The Details of product
Material Contact Parts | SS304/SS316L(1.4301/1.4404) | Provided with material inspection report |
Material Non-contact Parts | SS304(1.4301) |
|
Flow Rate | 20-10000L |
Motor Power | 1.5-75 kw |
Voltage | 380v, 220v, 230v, 208v, 460v, 440v, 415v, 400v |
Hertz | 50hz, 60hz |
Phase | Single Phase, Three Phases |
Rotation Speed | 2900rpm, 3500rpm,1450rpm |
Motor Brand | ABB, Siemens, China |
Type of Rotor Stator Design | Teeth Type (GC), Jet-Shear (JQ), Slot Type (GK), Jet-Round Ole Type (JR), Round-Hole Type (GY), Jet-Disperse (JF), High-Effective (GL), No-Air Blender (JA), Double-Rotor Vortex Type (GD), Jet-Vortex (JX), Square-Hole Type (GS), Fast-Speed Blender No-Dead Corner (GF) |
Processing Method | Dispersion, Emulsification, Homogenization, Fragmentation, Simultaneous Injection Through Stator Slots |
Rotor Working Speed | 15m/s to 40m/s |
Seal Material | Silicone,EPDM,FKM,Buna, all seals material comply with FDA21CFR117.2600 |
Working Pressure | ≤10bar(145psi) |
Supply Pressure for Air Actuator | 5~8(72.52psi~116psi) |
External Surface Treatment | Ra32~64ui n(0.8~1.6um) |
Internal Surface Treatment | Ra16~32uin(0.4~0.8um) |
Working Principle
High shear dispersing emulsifier effectively,quickly and evenly disperse a phase or phases to another consecutive phase,usually,these phases are dissolvable to each other.The rotor revolves quickly and strong force is produced through high tangent speed and high frequency mechanicaleffect,therefore,the material in the narrow slotamong stator and rotor receives strong forces from mechanical and liquid shearing,centrifugal force,pressing,liquid fraction,clashing,tearing and rush water.The dissolvable solid,liquid and gas material is then instantly dispersed and emulsified evenly and finely with better production procedures and appropriate addictive and finally products with stable high quality are made.
Intermittent High Shear Dispersing Emulsifier Working Process
The rotor revolves in high speed produces centrifugal force,which suctions the material from upper and lower feeding area axially to the operation chamber.The strong centrifugal force throws the material axially to the narrow slot between stator and rotor.The material then receives centrifugal press,clash and other forces,which firstly disperse and emulsify the material.The outer terminal of the rotor revolved in high speed produces a line speed more than 15m/s and even up to 40m/s, which produces strong mechanical and liquid shearing,liquid abrasion,clashing and tearing which fully disperse,emulsify,homogen,and break the material and jet from the stator slot. As materials jet in radial in high speed,they change their flow direction with resistance from themselves and vessel walls.The upperand lower axial suction force then leads to strong upper and lower rushing flows.After many circulations,the material is finally disper sed and emulsified evenly.
Options
Material SS304 an SS316L are optioned
Motor brand includes of ABB, Siemens and China
There are different voltage and hertz are optioned, such as 380v/50hz,220v/60hz
Silicone material includes of Silicone,EPDM,FKM,Buna, all seals material comply with FDA21CFR117.2600
Design Features
The flow is designed in 20-10000L
Motor power can be matched from 1.5 kw to 75kw
Teeth Type (GC), Jet-Shear (JQ), Slot Type (GK), Jet-Round Ole Type (JR), Round-Hole Type (GY), Jet-Disperse (JF), High-Effective (GL), No-Air Blender (JA), Double-Rotor Vortex Type (GD), Jet-Vortex (JX), Square-Hole Type (GS), Fast-Speed Blender No-Dead Corner (GF)
How to Order ?
What's material quality ? Such as SS304 or SS316L
What's products used for pump ? Such as cream
What's flow per hour ? Such as 3000 liters per hour
What's motor power ? Such as 2.2kw
What's voltage and hertz ? Such as 380v/50hz/ 3phase
What's type of motor brand? Such as ABB motor
