What is the function of stainless steel sanitary butterfly valves?

In general, throttle, control and rinse media require a short construction length, a fast opening and closing speed and a low pressure shutdown (small pressure difference). The stainless steel sanitary butterfly valves can be used if a two-way setting, a channel with reduced diameter, low noise development, cavitation and evaporation, low leakage into the atmosphere and abrasive media are available.throttle setting under special working conditions or under strict sealing, heavy wear and low temperatures (cryogenic conditions).

How is the stainless steel sanitary butterfly valve installed and maintained?

What are the most important points when selecting stainless steel sanitary butterfly valves?

How do you choose stainless steel sanitary butterfly valve?

How is the stainless steel sanitary butterfly valve installed and maintained?

Installation and maintenance

1.During installation the valve counter should be stopped in the closed position.

2.The opening position should be determined by the angle of rotation of the valve plate.

Three.For stainless steel sanitary valves with bypass valve, open the bypass valve before opening.

4.Installation should be in accordance with the manufacturer's installation instructions.The heavy stainless steel sanitary butterfly valve should be installed on a solid foundation.

What are the most important points when selecting stainless steel sanitary butterfly valves?

1. The main control parameter of the hygienic stainless steel valve is the specification size.

2. The stainless steel sanitary butterfly valve is a single panel air valve with simple structure, convenient processing, low cost and easy operation, but its adjustment accuracy is poor.It is only suitable for switching or rough fittings in the ventilation and air conditioning system.

3. It can be operated manually, electrically or by zipper and can be mounted at any angle within 90.

4. Due to the single axle valve plate, the load capacity is limited and the service life of the valve is short under the conditions of a large pressure difference and a large flow. The valve is divided into closed and ordinary type, heat storage and non-heat storage.

5. The electric stainless steel sanitary butterfly valve has only a two-position control and the electric drive is the same as the multi-wing valve.

How do you choose stainless steel sanitary butterfly valve?

The locking valve of the stainless steel sanitary butterfly valve is installed in the diameter direction of the pipe. The locking flap is simple, small and light.It consists of only a few parts and can be quickly opened and closed by turning around 90. The operation is simple. At the same time, the valve has good fluid control properties. If the stainless steel sanitary latch is in the fully opened position, the thickness of the latch is the resistance when the medium flows through the valve body.

If the stainless steel sanitary valve is to be used as a flow controller, it is important to choose the right size and type of fitting. The design principle of the cap is particularly suitable for the production of large diameter valves. Normally used stainless steel sanitary butterfly valves include disc locks and flange locks. Intermediate locking valves are used to connect the fitting between two pipe flaps with plugs. Flat-release valves are equipped with flanges on the valve. The flanges at both ends of the valve are connected to the pipe flaps with screws.

Xusheng Valves(Compass Valves) has focused on the field of stainless steel sanitary butterfly valves for many years, it commits to provide perfect service for every customer from the production and industrial production field.