How to use sanitary stainless steel sight glass?

The sanitary stainless steel sight glass is also called the observer. Its installation is very convenient, and it can be installed horizontally or vertically or arbitrarily. sanitary stainless steel sight glass is mainly composed of sight glass bottom plate, sight glass, valve components, etc.

What should sanitary stainless steel sight glass do when preparing for installation?

What should be paid attention to when installing sanitary stainless steel sight glass?

What should I pay attention to after installing sanitary stainless steel sight glass?

What should sanitary stainless steel sight glass do when preparing for installation?

Installation of pipe sight glass:

1. The choice of installation location. sanitary stainless steel sight glass is installed at a certain point in the pipeline. It is used to allow employees to observe, then the choice of location is very important. The first is location, if it is installed in a very biased position , Every observation takes half a day, which may affect the enthusiasm and timeliness of employees.

2. The choice of height. sanitary stainless steel sight glass is used for observation, mainly manual observation (a few are replaced by monitoring equipment). Therefore, the installation height of sanitary stainless steel sight glass is subject to the convenience of personnel observation. Too high, every time you have to borrow the climbing tool, it is very inconvenient; and the position is too low, and it may be unclear.

3. Sufficient light. Since it is for observation, light is a crucial condition. It is not clear at the position where the black light is blind. Therefore, the sanitary stainless steel sight glass must be installed in a well-lit pipe position, or specially equipped There are lighting devices.

What should be paid attention to when installing sanitary stainless steel sight glass?

1. Installation of sanitary stainless steel sight glass lens. Sight glass lens is installed to ensure that the sight glass base is flat and smooth, and the gasket between the lens and sight glass base is installed smoothly, and the gasket is not damaged and does not stick to grease. Before tightening the screws, make sure that the mirror holder and the cover are installed correctly, and then slowly tighten the screws diagonally.

2. Flange or threaded sanitary stainless steel sight glass device should be ensured that the gasket is installed well before work. If necessary, re-tighten the bolts. Ensure that the gasket between the pipe and the sanitary stainless steel sight glass is installed correctly, the connecting flange is not damaged, and the connecting screws are adjusted. It is not only necessary to ensure that the fittings connected with the sight glass lens are well sealed, but also that the seal between the sight glass and the pipe is good. And make sure that the pressure in the pipeline does not exceed the rated pressure.

What should I pay attention to after installing sanitary stainless steel sight glass?

After installation, there should be no additional pressure on the sanitary stainless steel sight glass, otherwise it will cause uneven force on the sight glass and cause the sight glass to break.

As technology advances, sanitary stainless steel sight glass are increasingly used in everyday life. Xusheng Valves (compact valves) is known for high precision stainless steel sanitary butterfly valves. And you can connect them.