Stainless Steel TRH-D Bottom Suction Power Mixing Dispersing Emulsifier

High shear dispersing emulsifier effectively,quickly and evenly disperse a phase or phases to another consecutive phase,usually,these phases are dissolvable to each other.The rotor revolves quickly and strong force is produced through high tangent speed and high frequency mechanical
effect,therefore,the material in the narrow slotamong stator and rotor receives strong forces from mechanical and liquid shearing,centrifugal force,pressing,liquid fraction,clashing,tearing and rush water.The dissolvable solid,liquid and gas material is then instantly dispersed and emulsified evenly
and finely with better production procedures and appropriate addictive and finally products with stable high quality are made.

Model:
TRH-D
Brand:
XUSHENG & COMPASS
Code:
02052101ABA01111

Availability:

Quantity:



Inquire Add to Basket

The Details of product

Material Contact Parts	SS304/SS316L(1.4301/1.4404)	Provided with material inspection report
Material Non-contact Parts	SS304(1.4301)
Flow Rate	0-20m³/hr
Motor Power	0.75-30kw
Voltage	380v,220v, 230v, 208v, 460v, 440v, 415v, 400v
Hertz	50hz, 60hz
Phase	Single Phase, Three Phases
Speed	1450rpm,2900rpm, 3500rpm
Motor Brand	ABB, Siemens, China
Type of Rotor Stator Design	Internal-Teeth Type, Double-Teeth Type, Internal and External Circulation Type
Processing Method	Dispersion, Emulsification, Homogenization effect
Seal Material	Silicone,EPDM,FKM,Buna, all seals material comply with FDA21CFR117.2600
Working Pressure	Vauum to 10bar
External Surface Treatment	Ra32~64ui n(o.8~1.6um)
Internal Surface Treatment	Ra16~32uin(0.4~0.8um)
Application	Suitable for low viscosity and high viscosity fluids, it can be applied in industries such as food, pharmaceuticals, cosmetics, coating chemicals, electronic materials chemicals, and petrochemical.

Operation Principle

TRH - D with innovative design, ingenious mix powder material absorption function and dispersed emulsion functionality set on one device, through the special design which has the function of suction powder high-speed rotation of the stator produce vacuum and mixed shear emulsifying ability, can quickly dry powder inhalation to work inside the cavity, and will immediately powder and liquid mixing shearing emulsification, achieve the desired product.The device not only greatly save the tedious powder feeding process and production time, and avoid the job shop dust pollution.This equipment widely used in food, medicine and cosmetics industries,and can be installed at the bottom of the various vacuum emulsifying tank.

Options
1. Material SS304 an SS316L are optioned
2. Motor brand includes of ABB, Siemens and China

3. There are different voltage and hertz are optioned, such as 380v/50hz,220v/60hz

4. Silicone material includes of Silicone,EPDM,FKM, Buna, all seals material comply with FDA21CFR117.2600

Design Features
1. The flow is designed in 20-10000L
2. Motor power can be matched from 1.5 kw to 75kw
3. Teeth Type (GC), Jet-Shear (JQ), Slot Type (GK), Jet-Round Ole Type (JR), Round-Hole Type (GY), Jet-Disperse (JF), High-Effective (GL), No-Air Blender (JA), Double-Rotor Vortex Type (GD), Jet-Vortex (JX), Square-Hole Type (GS), Fast-Speed Blender No-Dead Corner (GF)

How to Order ?