The Details of product
Material Contact Parts | SS304/SS316L(1.4301/1.4404) | Provided with material inspection report
|
Material Non-contact Parts | SS304(1.4301) |
Flow Rate | 1.5-110 m³/hr |
Motor Power | 4-132 kw |
Voltage | 380v,220v, 230v, 208v, 460v, 440v, 415v, 400v |
Hertz | 50hz, 60hz |
Phase | Single Phase, Three Phases |
Speed | 1470rpm, 2900rpm, 3500rpm |
Motor Brand | ABB, Siemens, China |
Type of Teeth | Rough Teeth, Middle Teeth, Fine Teeth |
| Teeth Type (GC), Jet-Shear (JQ), Slot Type (GK), Jet-Round Ole Type (JR), Round-Hole Type (GY), Jet-Disperse (JF), High-Effective (GL), No-Air Blender (JA), Double-Rotor Vortex Type (GD), Jet-Vortex (JX), Square-Hole Type (GS), Fast-Speed Blender No-Dead Corner (GF) |
Processing Method | Mixing→Dispersing→Emulsifying→Homogenizing |
Material of Mechanical Seal | Alloy + Viton & Alloy + EPDM |
Connection | Butt-weld, Ferrule End, Male Thread, Female-Male Threaded, Union, Weld-Thread, Flange |
Seal Material | Silicone,EPDM,FKM,Buna, all seals material comply with FDA21CFR117.2600 |
Working Pressure | ≤10bar(145psi) |
Supply Pressure for Air Actuator | 5~8(72.52psi~116psi) |
External Surface Treatment | Ra32~64ui n(o.8~1.6um) |
Internal Surface Treatment | Ra16~32uin(0.4~0.8um) |
Customized Configuration | TRL1 Pipeline High Shear Dispersing Emulsifying Pump | Option_1 |
TRL3 Pipeline High Shear Dispersing Emulsifying Pump | Option_2 |
Sanitary Lobe Rotary Pump | Option_3 |
TRH Intermittent High Shear Homogenizer | Option_4 |
TRH-I Tank Bottom High Shear Homogenous Emulsifier | Option_5 |
Agitator or without Agitator | Option for Sanitary Stainless Steel Tank |
| Jacket or without Jacket |
| Insulation or without Insulation |
45L Hopper, 50L Hopper, 60L Hopper |
Stainless Steel Pipes, Fitting, Valves & Unions, Etc. |
Working Principle
Stainless Steel TRL3 Three-stage Pipeline High Shear Dispersing Emulsification Emulsifying Pumps used for Three sets of stators and rotors are equipped in working cavity. Driving shaft in working cavity is an arm, electrical motor and the shaft in bearing cabinet can be connected by spring coupling to improve the operation quality of driving shaft. Seal form can be selected in different conditions. It is fit for middle-large scale on-line continuous production or circulated treatment production process.
Principle Of Dynamics
1. Medium sucked in by strong axial suction force.
2. Single phase liquid, multi-phase liquid or suspended particles are pumped
in though single-stage, double-stage or three-stage rotor and stators.
3. No matter what medium property is, pump will evenly shear all the liquid with high-intensity and controllable force.
4. Shearing rate is constant, different sizes depends on gear of rotor and
stator and speed of rotor.
Options
Material SS304 an SS316L are optioned
Connection can be butt-weld, ferrule, union, flange
Motor brand includes of ABB, Siemens and China
There are different voltage and hertz are optioned, such as 380v/50hz,220v/60hz
Silicone material includes of Silicone,EPDM,FKM,Buna, all seals material comply with FDA21CFR117.2600
Design Features
1. The flow is designed in 1.5 to 110 m³/hr
2. Motor power can be matched from 4 kw to 132 kw
3. The teeth can be designed to rough teeth, middle teeth and fine teet
Advantage
Mass production suitable for continuous production of
industrialized assembly line
Small diameter range,and highly even
Time saving,highly efficient and energy saving
Low noise,stable operation
Reduced quality difference between lots
Material is fully dispersed snd sheared
Daliver in short distancc with low lift
Easy operation,convenient maintenance
Automatic control
How to Order ?
1. What's material quality ? Such as SS304 or SS316L
2. What's products used for pump ? Such as cream
3. What's flow per hour ? Such as 3000 liters per hour
4. What's motor power ? Such as 2.2kw
5. What's voltage and hertz ? Such as 380v/50hz/ 3phase
6. What's type of motor brand? Such as ABB motor
7. Do you need VFD Frequency and Control Cabinet or wheel trolley ?
